oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl142.5m-50a 142.5mhz if saw filter 5.2mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl142.5m-50a january 2011 rev a 142.5mhz if saw filter 5.2mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=33nh, c1=36pf output l2=33nh, c1=36pf source/load impedance 50 ?
oscilent part number 813-sl142.5m-50a january 2011 rev a 142.5mhz if saw filter 5.2mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +85 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 142.35 142.5 142.65 insertion loss at fo db - 12.7 15.0 temperature coefficient ppm/c - -18 - amplitude ripple within fo 2.2 mhz db p-p - 0.3 0.8 group delay variation within fo 2.2 mhz nsec - 40 80 absolute delay at fo sec - 1.17 - bandwidth at ?1.0 db mhz 5.0 5.2 - bandwidth at ?3.0 db mhz - 5.8 - bandwidth at ?35.0 db mhz - 8.0 8.5 relative attenuation: lower sidelobe db 45 48 - upper sidelobe db 45 48 -
oscilent part number 813-sl142.5m-50a january 2011 rev a 142.5mhz if saw filter 5.2mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?35.0 db bandwidth at ?40.0 db
oscilent part number 813-sl142.5m-50a january 2011 rev a 142.5mhz if saw filter 5.2mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo2.2mhz group delay variation fo2.2mhz smith chart
oscilent part number 813-sl142.5m-50a january 2011 rev a 142.5mhz if saw filter 5.2mhz bandwidth product specification p. 5 www.oscilent.com vswr
|